Standards

Standard	ASTM A111
Title	Standard Specification for Zinc-Coated (Galvanized) “Iron” Telephone and Telegraph Line Wire
Scope	Specification for iron wire with class A, Class B, and Class C zinc coatings suitable for Use in telephone, telegraph, and signal transmission
Book Volume	01.06
Link	http://www.astm.org/Standards/A111.htm
Standard	ASTM A116
Title	Standard Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
Scope	Specification for metallic-coated steel fence fabric having a series of horizontal wires, with vertical (stay) wires woven of wrapped around the line wires, forming rectangular openings. The fence fabric is suitable for use in fences for farm field enclosure, for highway or railroad right-of-way fencing, etc.
Book Volume	01.06
Link	http://www.astm.org/Standards/A116.htm
Standard	ASTM A121
Title	Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
Scope	Specification for metallic-coated steel barbed wire, consisting of a strand of two wires
Book Volume	01.06
Link	http://www.astm.org/Standards/A121.htm
Standard	ASTM A123/A123M
Title	Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
Scope	Standard specification of the requirements for zinc coating (galvanizing)by the hot-dip process on iron and steel products made from rolled pressed and forged shapes, castings, plates, bars, and strips.
Book Volume	01.06
Link	http://www.astm.org/Standards/A123.htm
Standard	ASTM A143/A143M
Title	Standard Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
Scope	Standard practice for procedures that can be followed to safeguard against the possible embrittlement of steel hot-dip galvanized after fabrication, and outlines test procedures for detecting embrittlement.
Book Volume	01.06
Link	http://www.astm.org/Standards/A143.htm
Standard	ASTM A153/A153M
Title	Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
Scope	Standard specification for zinc coatings applied by the hot-dip process on iron and steel hardware.
Book Volume	01.06
Link	http://www.astm.org/Standards/A153.htm
Standard	ASTM A239
Title	Standard practice for locating the thinnest spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
Scope	Standard practice for the procedure for locating, by the use of a solution of copper sulfate, the thinnest spot in a zinc coating (hot dipped, electroplated, or sprayed) on iron or steel articles that are coated after the shape is produced by casting, drawing, pressing, or other forming methods
Book Volume	01.06
Link	http://www.astm.org/Standards/A239.htm
Standard	ASTM A308/A308M
Title	Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
Scope	Standard specification for sheet steel in coils and cut lengths coated with lead-tin alloy (terne metal, see 3.2.3) by the hot-dip process
Book Volume	01.06
Link	http://www.astm.org/Standards/A308.htm
Standard	ASTM A309
Title	Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
Scope	Standard test method for the determination of the weight and composition of coating on terne sheet by the triple-spot method
Book Volume	01.06
Link	http://www.astm.org/Standards/A309.htm
Standard	ASTM A363
Title	Standard Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
Scope	This specification covers high-strength, extra-high strength, and utilities grades of concentric lay steel wire strand composed of three wires or seven wires with Class A, Class B, or Class C zinc coatings specifically intended for use as overhead ground wires or static wires for electric power transmission lines
Book Volume	01.06
Link	http://www.astm.org/Standards/A363.htm
Standard	ASTM A384/A384M
Title	Standard Practice for Safeguarding Against Warpage and Distortion During Hot- Dip Galvanizing of Steel Assemblies
Scope	Steel assemblies and subassemblies fabricated by welding, such as composite structural members, sash, weldments, etc., that are to be hot-dip galvanized after fabrication, are subject to warpage and distortion of the material due to the heating and cooling incidental to the galvanizing operation, particularly when it is necessary for the assembly to be dipped more than once to cover the entire surface.
Book Volume	01.06
Link	http://www.astm.org/Standards/A384.htm
Standard	ASTM A385/A385M
Title	Standard Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
Scope	Standard practice indicating the precautions that should be taken to obtain high-quality hot-dip galvanized coatings
Book Volume	01.06
Link	http://www.astm.org/Standards/A385.htm
Standard	ASTM A390
Title	Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
Scope	Standard specification for zinc-coated fence fabric intended for enclosure of poultry, or to prevent entry into special areas
Book Volume	01.06
Link	http://www.astm.org/Standards/A390.htm
Standard	ASTM A392
Title	Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
Scope	Standard specification for zinc-coated steel chain-link fence fabric, zinc coated either before or after weaving
Book Volume	01.06
Link	http://www.astm.org/Standards/A392.htm
Standard	ASTM B6
Title	Standard Specification for Zinc
Scope	Standard specification for zinc metal made from ore or other material by a process of distillation or by electrolysis in five grades, including LME Grade, Special High Grade, High Grade, Intermediate Grade, and Prime Western Grade
Book Volume	02.04
Link	http://www.astm.org/Standards/B6.htm
Standard	ASTM B117
Title	Standard practice for operating salt spray (fog) apparatus
Scope	Standard practice for the apparatus, procedure, and conditions required to create and maintain the salt spray (fog) test environment
Book Volume	03.02
Link	http://www.astm.org/Standards/B117